BEROTEC Mofessor Manual - Página 10
Procurar online ou descarregar pdf Manual para Sistemas de lubrificação BEROTEC Mofessor. BEROTEC Mofessor 16 páginas. Automatic chain lubrication system
Também para BEROTEC Mofessor: Manual (16 páginas), Manual do utilizador (12 páginas)
Imprimir página4.4
Oil Tank and Dispensing Valve
The oil tank must be installed with the hose connection at the lowest
point. The golden ventilation of the tank must be at the highest point,
so that no oil can escape during driving.
To refill the system, a t-connector is placed between oil tank and
dispensing valve. The end cap, located at the end of the filler pipe,
needs to be attached. The removable end cap should be placed in an
accessible area, so refilling can be done easily. The oil flow direction
is marked with an arrow on the dispensing valve.
4.5
Electrics
The
MOFESSOR
connect/disconnect the plugs in energized condition.
The following steps are necessary for the electrical installation:
Chose installation place for the control unit
Connect dispensing valve to the control unit
Place switch for rain-mode activation on the motorbike
(Recommendation: handlebar / field of view, use switch
holder) and connect the switch to the control unit
Avoid placing the cable of the switch close to the ignition
BEROTEC GmbH
Manual
Figure 2: Dimensions of the Oil Tank
is delivered completely wired and tested. Don't
MOFESSOR
P a g e
| 9