ALIBI ALI-NVR7232R 빠른 설정 매뉴얼
{카테고리_이름} ALIBI ALI-NVR7232R에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALIBI ALI-NVR7232R 11 페이지.

ALI-NVR7232R Embedded Network Video Recorder Quick Setup Guide
This quick setup guide provides instructions to initially setup and use the ALI-NVR7232R network video recorder (NVR).
This recorder features:
Eight front-loaded HDD bays (HDDs not included)
•
HDDs are hot-swapable
•
Supports for up to 32 IP cameras
•
NVR Front Panel
1 .. 16 when lit, channel is active
Power button
Front panel controls and indicators
Name
Function Description
POWER
Unit is powered on.
ALARM
Turns red when a sensor alarm is detected.
TX/RX
Flashes when network connection is functioning properly.
Status Indicators
HDD
Flashes red when data is being read from or written to HDD.
READY
Ready LED is normally blue, indicating that the device is functioning properly.
ARCHIVE
Lit when a video backup / export operation is active.
1 .. 16
Channel Status indicator. Lit when channel is active.
USB 2.0 ports (2)
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).
1
www.Observint.com
ALI-NVR7232R front panel
Lock
Backup / Export active
USB 2.0 ports (2)
Not used
Bay 1 with HDD
Bay 2
Release button on side
Front accessible HDD bays (front panel open)
For information about using your NVR and its extensive capabilities, refer to the Alibi Embedded Network Video Recorder Firmware
V3.4.95 (or later) User Manual provided at www.alibisecurity.com/resources.
NVR Back Panel
Audio LINE IN
LAN (2)
Audio LINE
HDMI2, VGA2
VGA1, HDMI1
OUT 1, 2
Video Out
Video Out
Item
Description
eSATA
Connects external SATA HDD, CD / DVD-RM
RS-485, Alarms IN / OUT
See topic below.
Power connector
AC 100V ~ 240V power supply.
Audio LINE IN
RCA connector for audio line level input.
Audio LINE OUT 1, 2
RCA connectors for audio line level outputs.
RS-232 Interface
Connector for RS-232 devices.
VGA1, VGA2
DB9 connectors for VGA output 1, 2. Displays local video output and menus. VGA1 and VGA2 have different output format options.
HDMI1, HDMI2
HDMI video output 1, 2 connectors. HDMI1 and HDMI2 have different output format options.
USB 3.0 interface
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).
LAN Interface (2)
10 / 100 / 1000BASE-T network interfaces
GROUND
Ground (must be connected when NVR starts up)
ON / OFF switch
Switch for powering on / off the device.
Bay 7
Release button on side
RS-232
RS-485, Alarms IN / OUT
ON / OFF switch
eSATA
Ground
Fan outlet
Power connector
USB 3.0
Bay 8
ALI-NVR7232R_RQ
180717