KitchenAid KERK201TBL0 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} KitchenAid KERK201TBL0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KERK201TBL0 20 페이지. 30" (76 cm) freestanding electric ranges
페이지 인쇄4. Drill two 1/8"(3.0 mm) holes that correspond to the bracket
holes of the determined
mounting method. See below.
Floor Mounting
A
B
Wall Mounting
A. #12 x 1%" screws
B. Anti-tip bracket
A. #12 x 1%" screws
B. Anti-tip bracket
5. Using the Phillips screwdriver, mount anti-tip bracket to the
wall or floor with the two #12 x 1%" screws provided.
Power Supply
Cord
Direct Wire
Electrical
Shock Hazard
Disconnect
power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded
outlet.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
Electricam Shock Hazard
Disconnect
power before servicing.
Use 8 gauge copper
or 6 gauge aluminum
wire.
Electrically
ground
range.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
1. Disconnect
power.
2. Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range.
3. Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.