KitchenAid KERK201TBL0 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} KitchenAid KERK201TBL0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KERK201TBL0 20 페이지. 30" (76 cm) freestanding electric ranges
페이지 인쇄4. Addstrain relief.
Style 1: Power supply cord strain relief
•
Assemble a UL listed strain relief in the opening.
B
A. UL listed strain relief-
large opening
B. Smafl opening
Feed the power supply cord through the strain relief on
the cord/conduit
plate on bottom of range. Allow enough
slack to easily attach the wiring to the terminal block.
Tighten strain relief screw against the power supply cord.
Style 2: Direct wire strain relief
•
Use Phillips screwdriver to remove screws and rotate/
conduit plate 180°.
Replace cord/conduit
plate and insert screws.
_
................
A
A. Smafl opening
B. Large opening
•
Assemble a UL listed conduit connector in the opening.
A
............
..... C
A. Removable retaining nut = smafl opening
B. Conduit connecter
C. Large opening
•
Feed the flexible conduit through the strain relief, allowing
enough slack to easily attach wiring to the terminal block.
•
Tighten strain relief screw against the flexible conduit.
A. Large opening
B. Smafl opening
Position cord/conduit
plate as shown in the following
illustration.
A. Smafl opening
B. Large opening
5. Replace back panel and screws on rear of range.
6. Complete installation following instructions
for your type of
electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
8