Makita DA4030 사용 설명서 - 페이지 7

{카테고리_이름} Makita DA4030에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita DA4030 17 페이지. Angle drill
Makita DA4030에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (8 페이지), 사용 설명서 (10 페이지)

페이지 인쇄
Makita DA4030 사용 설명서
FUNCTIONAL
DESCRIPTION
1. Switch trigger
1
A
1. Reversing switch lever
1
2
1. Pointer
2. Speed change knob
3. Lock button
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

003021
CAUTION:
•
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
1
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.

Reversing switch action

003028
This tool has a reversing switch to change the direction of
rotation. Depress the reversing switch lever from the A side
for clockwise rotation or from the B side for counterclockwise
rotation.
B
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.

Speed change

For Model DA4031 only
003031
Two speed ranges can be preselected with the speed
3
change knob.
To change the speed, depress the lock button and turn the
speed change knob so that the pointer points to the position
1 for low speed or the position 2 for high speed.
CAUTION:
•
Use the speed change knob only after the tool comes to
a complete stop. Changing the tool speed before the tool
stops may damage the tool.
•
Always set the speed change knob carefully into the
correct position. If you operate the tool with the speed
7