Garden Architecture Summer Haven 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Garden Architecture Summer Haven에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Architecture Summer Haven 8 페이지. Arbor

TOP PANEL ASSEMBLY

Note: Align top panel with pencil marks on edge of gable.

Diagram 7

ANCHORING THE ARBOR

Securing the arbor is recommended. This arbor may be secured using a variety of techniques including:

Permanent anchoring with concrete.

2. Anchoring with gravel or sand.

3. Anchoring directly into ground.

4. Attaching to an existing structure (a deck or wall for example).

If following options 1, 2 or 3 anchoring stakes can be found in the lawn & garden or building products departments.

Use caution when moving the arbor to its final placement. Two people are required to lift or move the arbor; always

use caution.

Page 3 of 3

445.35.58

Carefully lay arbor on front side.

2. Position one top panel on gables so

that it is aligned with pencil marks on

Diagram 5

edges of gable frames, as in Diagram 5.

Note that end pieces of lath (on short

sides of top panel) sit on the outside

of the gable frames as shown in Dia-

gram 6. Clamp in place if clamps are

available.

3. Fasten top panel to gable top using

four 2" screws (C) through pre-

drilled holes, as in Diagram 5. Remove

clamps.

Diagram 6

4. Carefully turn arbor so that backside

faces the ground.

5. Repeat steps 2 & 3 for second top

panel as shown in Diagram 7.

6. Return arbor to upright position.

End

Gable

Lath

Frame

Updated September 27, 2010