Garden Architecture Summer Haven Montaj Talimatları Kılavuzu - Sayfa 3

Dış Mekan Mobilyaları Garden Architecture Summer Haven için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Garden Architecture Summer Haven 8 sayfaları. Arbor

Sayfayı Yazdır

TOP PANEL ASSEMBLY

Note: Align top panel with pencil marks on edge of gable.
C
C
Diagram 7
ANCHORING THE ARBOR
Securing the arbor is recommended. This arbor may be secured using a variety of techniques including:
1.
Permanent anchoring with concrete.
2. Anchoring with gravel or sand.
3. Anchoring directly into ground.
4. Attaching to an existing structure (a deck or wall for example).
If following options 1, 2 or 3 anchoring stakes can be found in the lawn & garden or building products departments.
Use caution when moving the arbor to its final placement. Two people are required to lift or move the arbor; always
use caution.
Page 3 of 3
C
C
445.35.58
1.
Carefully lay arbor on front side.
2. Position one top panel on gables so
that it is aligned with pencil marks on
Diagram 5
edges of gable frames, as in Diagram 5.
Note that end pieces of lath (on short
sides of top panel) sit on the outside
of the gable frames as shown in Dia-
gram 6. Clamp in place if clamps are
available.
3. Fasten top panel to gable top using
four 2" screws (C) through pre-
drilled holes, as in Diagram 5. Remove
clamps.
Diagram 6
4. Carefully turn arbor so that backside
faces the ground.
5. Repeat steps 2 & 3 for second top
panel as shown in Diagram 7.
6. Return arbor to upright position.
End
Gable
Lath
Frame
Updated September 27, 2010