Garden Gear G4801 사용 설명서 - 페이지 10

{카테고리_이름} Garden Gear G4801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Gear G4801 17 페이지. 20v cordless telescopic chainsaw

tie straps just touch the bottom of the chain bar rail. Turning clockwise

tightens the chain tension. Then check the chain for smooth rotation

and proper tension while moving it by hand (wear gloves). If necessary,

readjust the chain tightening ring (but loosen the bar cover first).

Hold the tip of the bar up and tighten the cover nut securely.

Chain is correctly tightened when there is no slack on the underside of

the bar, the chain is snug, but it can be turned by hand without binding.

During normal operation, the temperature of the chain will increase. The

drive links of a correctly tightened warm chain will hang

approximately .050 in. out of the bar groove.

NOTE: If chain is too tight, it will not rotate. Turn adjusting chain tightening ring

anticlockwise.

Assembling the shoulder strap

Always operate using the shoulder strap provided . Failure to do so could

result in loss of balance and result in personal injury

Place the shoulder strap so that it runs over the left shoulder, crossing the

chest and back.

Adjust the position of the securing clip loosening the strap position lock

nut(6) anticlockwise and sliding it into required position.

This unit is designed with a quick-release strap hook, pulling the bar-shaped