Garden Gear G4801 사용 설명서 - 페이지 11

{카테고리_이름} Garden Gear G4801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Gear G4801 17 페이지. 20v cordless telescopic chainsaw

webbing will enable to release the strap from pole chain saw quickly in

case of emergency.

Adjusting the cutting length

To adjust the cutting length, open the lock trigger of the telescopic tube(8),

and adjust to suitable height. Attention: Don't forget to lock the lock trigger of

the telescopic tube(8).

Adjusting the cutting angle

This pole chain saw is supplied with three cutting positions for different cutting

status, adjust the cutting head angle to fit the growth of the plant. Press the

rotating button(13) on the left and right of the working head, and make the

working head(14) revolve, until it snaps securely into place at one of the

three positions indicated by the notches.

Adding the chain bar lubricant

The pole chain saw is equipped with an oil automatic system. The Chain bar

and Chain must always be oil lubricated when working. Non-observance of

this will result in increased wear out on the bar and saw chain.

NOTE: The chainsaw is supplied with no chain oil added. Lubricant oil level

should also be checked after every 10 minutes of use and refilled as needed.