Corsa 14255 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Corsa 14255에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corsa 14255 6 페이지. Twin pro series 4" exhaust system for chevrolet ssr 2004; chevrolet ssr 2005; chevrolet ssr 2006

페이지 인쇄

2005 Removal Instructions:

1) Cut Driver Side Tail Pipe using chain style cutting device. Remove the Driver

Side Tail Pipe section from the vehicle. See Fig.'s 1 & 2.

2) Cut the 1/2" rod connecting the two tailpipes near the differential using a cut-off wheel or sawsall.

See Fig. 3.

3) Cut the Passenger Side Tail Pipe approximately 3" past the muffler exit. Remove the Passenger Side

Tail Pipe section from the vehicle. See Fig. 4.

4) Follow step 7 -12 on page 2 of instruction pamphlet to complete the removal of the stock

exhaust system.

FIG. 1

CORSA System Install Instructions:

Install CORSA Head Pipe shown in Fig. M.

Pre-tighten nuts using a 15mm socket as shown in Fig. N. Do not

completely tighten nuts on Head Pipe until the rest of the CORSA

system is in place.

Install muffler, ensuring drain hole is facing toward the ground.

See Figures O & P.

FIG. N

FIG. 2

FIG. O

FIG. 3

FIG. 4

FIG. M

FIG. P