Corsa 14255 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Corsa 14255에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corsa 14255 6 페이지. Twin pro series 4" exhaust system for chevrolet ssr 2004; chevrolet ssr 2005; chevrolet ssr 2006

페이지 인쇄

6) After completely cutting pipe in previous step, remove the driver side

segment from hanger grommet. Spray some soapy water in grommet

to help. See Fig. F

7) Scribe a line 3 inches in front of stock muffler inlet. See Fig. G

8) Cut pipe approximately 3 inches in front of muffler inlet, as shown in Fig. H.

9) Loosen nuts at flange connection. Use a 15mm socket to remove flange nuts. See Fig. I

10) Remove Head Pipe section from grommet as shown. Spray some soapy water in grommet

to help. See Fig. J

11) Remove cross bar bolts and cross bar from frame rails. See Fig. K

Be careful. The muffler is resting on the cross bar at this point.

12) Remove final section (muffler and "Y" pipe) from grommet as shown in Fig. L. Spray some

soapy water in grommet to help. Carefully remove pipe from the rest of the vehicle.

FIG. F

FIG. I

FIG. L

FIG. G

FIG. J

FIG. H

FIG. K