Corsa 14255 Handleiding voor installatie-instructies - Pagina 2

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Corsa 14255. Corsa 14255 6 pagina's. Twin pro series 4" exhaust system for chevrolet ssr 2004; chevrolet ssr 2005; chevrolet ssr 2006

Pagina afdrukken

6) After completely cutting pipe in previous step, remove the driver side

segment from hanger grommet. Spray some soapy water in grommet

to help. See Fig. F

7) Scribe a line 3 inches in front of stock muffler inlet. See Fig. G

8) Cut pipe approximately 3 inches in front of muffler inlet, as shown in Fig. H.

9) Loosen nuts at flange connection. Use a 15mm socket to remove flange nuts. See Fig. I

10) Remove Head Pipe section from grommet as shown. Spray some soapy water in grommet

to help. See Fig. J

11) Remove cross bar bolts and cross bar from frame rails. See Fig. K

Be careful. The muffler is resting on the cross bar at this point.

12) Remove final section (muffler and "Y" pipe) from grommet as shown in Fig. L. Spray some

soapy water in grommet to help. Carefully remove pipe from the rest of the vehicle.

FIG. F

FIG. I

FIG. L

FIG. G

FIG. J

FIG. H

FIG. K