Corsa 14866BLK 설치 지침 매뉴얼

{카테고리_이름} Corsa 14866BLK에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corsa 14866BLK 6 페이지. Cat back exhaust system for chevrolet silverado 2014; chevrolet silverado 2015; chevrolet silverado 2016; chevrolet silverado 2017; gmc sierra 1500 2014; gmc sierra 1500 2015; gmc sierra 1500 2016; gmc sierra 1500 2017

Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a lift and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
3/8" drive ratchet
3/8" drive 13mm deep socket
3/8" drive 15mm deep socket
Small flathead screwdriver or similar tool
Chain-style pipe cutter or similar device
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Cat Back Exhaust System
Single Side Exit w/ Twin 4.5" Pro-Series Tips
2014+ Chevrolet Silverado/GMC Sierra 1500 6.2L
143.5" & 153" Wheel Base
PN: 14866, 14866BLK
Grommet pullers
Soap and water solution
Torque Wrench
Penetrating lubricant spray
Safety glasses
Bill of Materials
1. 16SE2034 – Muffler Assembly
2. 16SE3028 – Tip Assembly
3. 16SE4474 – Head Pipe Assembly
4. 16SE4478 – Tail Pipe Assembly
5. 16SE4487 – 153" WB Adapter Pipe
6. 16SE7100 – Hardware Kit