HIKVISION HiLook Series 사용자 설명서 - 페이지 9

{카테고리_이름} HIKVISION HiLook Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 18 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지)

페이지 인쇄
HIKVISION HiLook Series 사용자 설명서
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Loosen screws to take apart the junction box.
2. Paste the drill template for junction box to the
installation location.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
four PA4 × 25 screws according to the actual object.
Figure 2-9 Secure Junction Box Body
6. Fix the base to the junction box cover with three M4
× 10 screws.
Figure 2-10 Fix Base to Junction Box Cover
7. Fix the junction box cover to the junction box body
with three M3 screws.
Figure 2-11 Fix Junction Box Cover to Junction Box Body
8. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
9. Refer to step 6 of 2.2.1
Junction Box
installation.
2.2.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
to adjust the angle and finish the
Figure 2-12 Finish Installation
Ceiling Mounting without