HIKVISION HiLook Series 사용자 설명서 - 페이지 10
{카테고리_이름} HIKVISION HiLook Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 17 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (13 페이지)
페이지 인쇄
9. Refer to Step 6 of 2.1.1 Ceiling/Wall Mounting without
Junction Box to finish installation.
2.2
Installation of Type III & IV Camera
2.2.1 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the installation
location.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
3. Install the camera to ceiling.
i. Secure the installation plate to the ceiling with
three PA4 × 25 screws (supplied).
ii. Fit the camera onto the installation plate.
iii. Turn the camera as the figure below until it snaps
into the installation plate.
Figure 2-6 Install the Camera to Ceiling
4. Connect the cables.
5. Power on the camera to adjust the view angle
according to the figure below.
1). Rotate the enclosure to adjust the pan position [0°
to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Ceiling mounting with a junction box is similar to ceiling
mounting with an inclined ceiling mount. Following
steps take a junction box as an example.
Steps:
1. Loosen screws to take apart the junction box.
2. Paste the drill template for junction box to the
installation location.
Figure 2-5 Fix the Cover to Its Body
Figure 2-7 3-Axis Adjustment