HIKVISION HiLook Series Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla DVR HIKVISION HiLook Series. HIKVISION HiLook Series 17 stron. Smart hybrid light bullet & turret camera
Również dla HIKVISION HiLook Series: Skrócona instrukcja obsługi (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (20 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (13 strony)

9. Refer to Step 6 of 2.1.1 Ceiling/Wall Mounting without

Junction Box to finish installation.

2.2

Installation of Type III & IV Camera

2.2.1 Ceiling Mounting without Junction Box

Steps:

1. Paste the drill template (supplied) to the installation

location.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall plugs.

3. Install the camera to ceiling.

i. Secure the installation plate to the ceiling with

three PA4 × 25 screws (supplied).

ii. Fit the camera onto the installation plate.

iii. Turn the camera as the figure below until it snaps

into the installation plate.

Figure 2-6 Install the Camera to Ceiling

4. Connect the cables.

5. Power on the camera to adjust the view angle

according to the figure below.

1). Rotate the enclosure to adjust the pan position [0°

to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.2.2 Ceiling Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.



Ceiling mounting with a junction box is similar to ceiling



mounting with an inclined ceiling mount. Following

steps take a junction box as an example.

Steps:

1. Loosen screws to take apart the junction box.

2. Paste the drill template for junction box to the

installation location.

Figure 2-5 Fix the Cover to Its Body

Figure 2-7 3-Axis Adjustment