JAMO MPA-101 사용자 설명서 - 페이지 7
{카테고리_이름} JAMO MPA-101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. JAMO MPA-101 16 페이지. Jamo multi-purpose amplifier mpa-101
페이지 인쇄
The Jamo MPA-101 is equipped with gold-plated push button binding posts which will accept
very heavy stripped wire.
Ask your local Jamo dealer for advice on the choice of cable.
Connect the loudspeakers to your Jamo MPA-101 as follows:
1. Turn of the MPA-101
2. Carefully remove approx. 3/8" (10 mm) of the insulating material - beware not to damage
the conductors!
3. Twist the conductor ends
4. Push the binding posts so the conductors can easily fit into the holes
Always make sure that:
Your loudspeakers are in correct phase;
The loudspeaker's + terminal is connected to the Jamo MPA-101's + terminal.
The loudspeaker's - terminal is connected to the Jamo MPA-101's - terminal.
Usually, the loudspeaker cable is marked on one wire which is normally used to connect the +
terminals to ensure correct phase.
Connection
Note: Make sure that the stripped + and - wires
do not touch each other, as a short-circuit could
damage the Jamo MPA-101's output section.
7