JAMO MPA-101 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель JAMO MPA-101. JAMO MPA-101 16 страниц. Jamo multi-purpose amplifier mpa-101

The Jamo MPA-101 is equipped with gold-plated push button binding posts which will accept

very heavy stripped wire.

Ask your local Jamo dealer for advice on the choice of cable.

Connect the loudspeakers to your Jamo MPA-101 as follows:

1. Turn of the MPA-101

2. Carefully remove approx. 3/8" (10 mm) of the insulating material - beware not to damage

the conductors!

3. Twist the conductor ends

4. Push the binding posts so the conductors can easily fit into the holes

Always make sure that:

Your loudspeakers are in correct phase;

The loudspeaker's + terminal is connected to the Jamo MPA-101's + terminal.

The loudspeaker's - terminal is connected to the Jamo MPA-101's - terminal.

Usually, the loudspeaker cable is marked on one wire which is normally used to connect the +

terminals to ensure correct phase.

Connection

Note: Make sure that the stripped + and - wires

do not touch each other, as a short-circuit could

damage the Jamo MPA-101's output section.