Airgineers TX04 매뉴얼 - 페이지 2

{카테고리_이름} Airgineers TX04에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airgineers TX04 2 페이지. Fpv video camera with 40-channel transmitter

Switching channel

A short press of the button changes the channel which is indicated using the blue LEDs (6 and

7). The below table shows how these LEDs indicate which channel is selected.

Channel

LED 6 status

CH1

CH2

Flash 2 times

CH3

Flash 3 times

CH4

Flash 4 times

CH5

CH6

CH7

CH8

Switching Band

Press and hold the button for 2 second or longer, then release to change band. The band is

indicated by the 5 red LEDs (1 to 5). LED1 indicates Band 1, LED2 indicates Band 2 etc.

Examples

•

LED2 (red) is on and LED6 (blue) flashes 2 times = Band 2, CH2 (5.752GHz)

•

LED4 (red) is on and LED7 (blue) is on permanently = Band 4, CH5 (5.820GHz)

When flying FPV with more than one drone in the sky at once, you should try to operate on

frequencies as far from each other as possible. The RaceBand (Band 5) is designed to offer the

widest split between channels.

For example:

•

2 drones in the air at once - use RaceBand CH1 and RaceBand CH8 as these two

channels have frequencies that are as far from each other as possible.

•

3 drones in the air at once - use RaceBand CH1 , RaceBand CH4 and RaceBand CH8 as

these three channels have frequencies that are as far from each other as possible.

LED 7 Status

Flash 6 times

Flash 7 times

Flash 8 times