Airgineers TX04 Handmatig - Pagina 2
Blader online of download pdf Handmatig voor {categorie_naam} Airgineers TX04. Airgineers TX04 2 pagina's. Fpv video camera with 40-channel transmitter
Pagina afdrukken
Switching channel
A short press of the button changes the channel which is indicated using the blue LEDs (6 and
7). The below table shows how these LEDs indicate which channel is selected.
Channel
LED 6 status
CH1
On
CH2
Flash 2 times
CH3
Flash 3 times
CH4
Flash 4 times
CH5
CH6
CH7
CH8
Switching Band
Press and hold the button for 2 second or longer, then release to change band. The band is
indicated by the 5 red LEDs (1 to 5). LED1 indicates Band 1, LED2 indicates Band 2 etc.
Examples
•
LED2 (red) is on and LED6 (blue) flashes 2 times = Band 2, CH2 (5.752GHz)
•
LED4 (red) is on and LED7 (blue) is on permanently = Band 4, CH5 (5.820GHz)
When flying FPV with more than one drone in the sky at once, you should try to operate on
frequencies as far from each other as possible. The RaceBand (Band 5) is designed to offer the
widest split between channels.
For example:
•
2 drones in the air at once - use RaceBand CH1 and RaceBand CH8 as these two
channels have frequencies that are as far from each other as possible.
•
3 drones in the air at once - use RaceBand CH1 , RaceBand CH4 and RaceBand CH8 as
these three channels have frequencies that are as far from each other as possible.
LED 7 Status
On
Flash 6 times
Flash 7 times
Flash 8 times