Jandy Infinite WaterColors IWC15W100 소유자 매뉴얼 - 페이지 14
{카테고리_이름} Jandy Infinite WaterColors IWC15W100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Infinite WaterColors IWC15W100 16 페이지. Nicheless led light
Jandy Infinite WaterColors IWC15W100에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지), 매뉴얼 (2 페이지)
![Jandy Infinite WaterColors IWC15W100 소유자 매뉴얼](/uploads/products/server2/2127356/2127356.png)
ENGLISH
5.3.2
Preset Colors
1.
Go to the equipment page
and select the zone you want
to change color.
2.
After selecting the zone, then
choose from the list of preset
colors to apply that preset
color to your zone.
5.3.3
Preset Color Shows
1.
From equipment page,
choose the zone you want to
change color.
2.
After selecting the zone,
then choose from the list of
preset color shows to apply
that preset color show to your
zone.
5.4
Adjust Brightness
1.
From the equipment page,
select the sun icon on the
zone where you want to
adjust the brightness.
2.
Move the slider bar up or
down with your finger and
then click apply to change the
brightness.
Section 6. OneTouch
6.1
Light Setup
6.1.1
Assign Lights
Page 14
Jandy
Infinite WaterColors
®
Setup
Nicheless LED Light | Owner's Manual
™
1.
Choose menu on the OneTouch
display screen and press select.
2.
From the menu screen, go to >
System Setup > IWC Lights.
3.
Select zone set up.
4.
From the IWC Lights Zone
Setup screen, choose Assign
Zone.
5.
From the IWC Lights screen,
choose your device (light
controller) from the list to assign
lights to a light zone.
6.
A list of lights currently
connected to the light controller
will appear, select a light and
assign it to a light zone (up to 4
zones).
NOTE The list will display the last six
digits of your Infinite WaterColors
LED Light Controller serial
number located on the bottom of
your controller.
NOTE When exiting the Light Zone
Setup page, the lights will turn
off.
6.1.2
Name Light Zones
1.
Choose menu on the OneTouch
display screen and press select.
2.
From the menu screen, go to >
System Setup > IWC Lights.
3.
From the IWC Lights screen,
select Zone Setup.