Jandy Infinite WaterColors IWC15W100 Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for Controller Jandy Infinite WaterColors IWC15W100. Jandy Infinite WaterColors IWC15W100 16 pages. Nicheless led light
Also for Jandy Infinite WaterColors IWC15W100: Installation And Operation Manual (12 pages), Manual (2 pages)
![Jandy Infinite WaterColors IWC15W100 Owner's Manual](/uploads/products/server2/2127356/2127356.png)
ENGLISH
5.3.2
Preset Colors
1.
Go to the equipment page
and select the zone you want
to change color.
2.
After selecting the zone, then
choose from the list of preset
colors to apply that preset
color to your zone.
5.3.3
Preset Color Shows
1.
From equipment page,
choose the zone you want to
change color.
2.
After selecting the zone,
then choose from the list of
preset color shows to apply
that preset color show to your
zone.
5.4
Adjust Brightness
1.
From the equipment page,
select the sun icon on the
zone where you want to
adjust the brightness.
2.
Move the slider bar up or
down with your finger and
then click apply to change the
brightness.
Section 6. OneTouch
6.1
Light Setup
6.1.1
Assign Lights
Page 14
Jandy
Infinite WaterColors
®
Setup
Nicheless LED Light | Owner's Manual
™
1.
Choose menu on the OneTouch
display screen and press select.
2.
From the menu screen, go to >
System Setup > IWC Lights.
3.
Select zone set up.
4.
From the IWC Lights Zone
Setup screen, choose Assign
Zone.
5.
From the IWC Lights screen,
choose your device (light
controller) from the list to assign
lights to a light zone.
6.
A list of lights currently
connected to the light controller
will appear, select a light and
assign it to a light zone (up to 4
zones).
NOTE The list will display the last six
digits of your Infinite WaterColors
LED Light Controller serial
number located on the bottom of
your controller.
NOTE When exiting the Light Zone
Setup page, the lights will turn
off.
6.1.2
Name Light Zones
1.
Choose menu on the OneTouch
display screen and press select.
2.
From the menu screen, go to >
System Setup > IWC Lights.
3.
From the IWC Lights screen,
select Zone Setup.