Jandy Infinite WaterColors IWC15W100 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Jandy Infinite WaterColors IWC15W100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Infinite WaterColors IWC15W100 16 페이지. Nicheless led light
Jandy Infinite WaterColors IWC15W100에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지), 매뉴얼 (2 페이지)
페이지 인쇄
ENGLISH
14 VAC Class 2 Magnetic
Transformer or
Junction Box
Rigid 1" electrical conduit. Sweep
elbows only, no 90º elbows.
NOTE: Vertical installations such as bench and walk-out locations will use ALL of the same clearance requirements.
The light face must be completely snug with the light fitting without any protrusion from the light fixture.
Figure 1.
Jandy
Use the chart below to determine the appropriate pipe length for your
installation.
WATTS
15W
Table 1.
Jandy
3.2
Installing the Light Fixture
NOTE:
Perform these steps only after the electrical system requirements are met.
1.
Keep protective cover on to protect the light during installation.
NOTE: Gasket helps ensure
that the conduit is not a
potential leak path.
See Table 1
for min. length
requirements
Figure 2.
Standard installation with 1.5" pool wall fitting
Page 8
Jandy
Infinite WaterColors
®
48" min.
Check AHJ for other J-box requirements
LED Light Installation with Standard 1.5" Plastic Fitting
®
MINIMUM LENGTH FOR 1.5" PIPE
Cord length options: 100ft and 200ft
LED Light Minimum 1.5" pipe length
®
The light face must be completely
snug with the return fitting without
any protrusion from the light fixture.
Nicheless LED Light | Owner's Manual
™
8" minimum to maximum water level
Maximum possible water line.
(top of copping)
4" minimum to top of lens
1.5" pipe. Length requirement varies
by model. (See Table 1)
10"