Jandy Infinite WaterColors IWC15W100 Owner's Manual - Page 8
Browse online or download pdf Owner's Manual for Controller Jandy Infinite WaterColors IWC15W100. Jandy Infinite WaterColors IWC15W100 16 pages. Nicheless led light
Also for Jandy Infinite WaterColors IWC15W100: Installation And Operation Manual (12 pages), Manual (2 pages)
![Jandy Infinite WaterColors IWC15W100 Owner's Manual](/uploads/products/server2/2127356/2127356.png)
ENGLISH
14 VAC Class 2 Magnetic
Transformer or
Junction Box
Rigid 1" electrical conduit. Sweep
elbows only, no 90º elbows.
NOTE: Vertical installations such as bench and walk-out locations will use ALL of the same clearance requirements.
The light face must be completely snug with the light fitting without any protrusion from the light fixture.
Figure 1.
Jandy
Use the chart below to determine the appropriate pipe length for your
installation.
WATTS
15W
Table 1.
Jandy
3.2
Installing the Light Fixture
NOTE:
Perform these steps only after the electrical system requirements are met.
1.
Keep protective cover on to protect the light during installation.
NOTE: Gasket helps ensure
that the conduit is not a
potential leak path.
See Table 1
for min. length
requirements
Figure 2.
Standard installation with 1.5" pool wall fitting
Page 8
Jandy
Infinite WaterColors
®
48" min.
Check AHJ for other J-box requirements
LED Light Installation with Standard 1.5" Plastic Fitting
®
MINIMUM LENGTH FOR 1.5" PIPE
Cord length options: 100ft and 200ft
LED Light Minimum 1.5" pipe length
®
The light face must be completely
snug with the return fitting without
any protrusion from the light fixture.
Nicheless LED Light | Owner's Manual
™
8" minimum to maximum water level
Maximum possible water line.
(top of copping)
4" minimum to top of lens
1.5" pipe. Length requirement varies
by model. (See Table 1)
10"