Garden Wood Furniture SIENNA FINISH 963KFSIc 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Garden Wood Furniture SIENNA FINISH 963KFSIc에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Wood Furniture SIENNA FINISH 963KFSIc 12 페이지. Potting bench

페이지 인쇄

Fig. 3

3) Decide whether you want the tub to be on the left or right side. With the Center Shelf Assembly

(Rc) lying face down, place the apron assembly so that the tub opening is on the desired side.

Fasten in place with six 4x30mm Phillips Screws (C) through the pocket drilled holes in the aprons.

See Figure 3.

x12

Fig. 4

Fig. 4a

4) Glue two Dowels (D) into the two holes in the narrow side of each Leg (Sc) near the top.

Attach a Leg (Sc) to each end of the Center Shelf Side Aprons with two dowels in the

predrilled holes. See Figure 4.

Attach the legs to the Front Apron (Qc) and Back Apron (Oc) with two 8x60mm Hex Bolts

(Ec), Washers (Fc) and Hex Nuts (Gc) in each pair of holes. See Figure 4a. Glue Dowels (D)

into the inner holes below the tub opening in the Front Apron (Qc) and two into the Back

Apron (Oc). See Figure 4b.

Fig. 4a

Shown with tub opening

on the left side.

Fig. 4b

963KFSIc – Page 4 – 10/08