Garden Wood Furniture SIENNA FINISH 963KFSIc 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Garden Wood Furniture SIENNA FINISH 963KFSIc에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Wood Furniture SIENNA FINISH 963KFSIc 12 페이지. Potting bench

페이지 인쇄

Fig. 5

x14

)

Attach the Bottom Shelf Assembly (Tc) to the Legs (Sc) with one

Washer (Fc) and Hex Nut (Gc) through the single predrilled hole in each leg. See Figure 5.

Using the predrilled holes, attach a Bottom Shelf Side Apron (U

shelf assembly with four 4x40mm Phillips Screws (B).

Set the hutch over the back edge of the center shelf assembly.

in each end of the center shelf assembly and two in the back ed

holes in the bottom of the hutch sides and two in the hutch apr

Screws in the blind holes until they begin to come through the

hutch sides and apron over the screws and complete inserting th

Fig. 5a

8x60mm Hex Bolt (Ec),

c) to each end of the

There are two blind holes

ge. There are also two

on. Start 4x40mm Phillips

top. Align the holes in the

e screws. See Figure 5a.

bottom

963KFSIc – Page 5 – 10/08