Jandy Pro Series K-2000 설치 및 운영 매뉴얼 - 페이지 13
{카테고리_이름} Jandy Pro Series K-2000에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Pro Series K-2000 20 페이지. Electronic water leveler
페이지 인쇄Jandy Pro Series Levolor
II Electronic Water Leveler
®
Models K-2000
Section 4. Operation
Sensor
Power
High
Water
Sensor
Figure 12. Controller Lights
Table 2. LED Indicators
Function
LED
Indicated
Power
Turn Power ON
Detect Low Water in
Sensor
Catch Basin
Fill Pool
Filling
Fill Safety Lockout
High Water
Detect High Water
Sensor
in Catch Basin
Pump Water from
Catch Basin to Pool
High Water
Pump
Stop Pumping Catch
Basin Water to Pool
|
Installation and Operation Manual
Filling
High
Water
Pump
Operating
Color
Mode
Power is
Green
ON
Water is
Yellow
Low
Fill Valve is
Green
ON
Fill Valve is
Red
OFF
Water is
Yellow
High
High Water
Green
Pump is ON
High Water
Off
Pump is OFF
ENGLISH
4.1
Controller Lights
The controller has five (5) LED lights. See Figure 12
and Table 2, LED Indicators.
The Power light turns green when power is on.
The Sensor light turns yellow when the water is not
touching the Fill Sensor.
The Fill light turns green when the valve is operational
and filling, and it turns red when the unit enters Lockout
Safety Mode.
The High Water Sensor light turns yellow when the
High Water Sensor is in the water.
The High Water Pump light turns green when the
vanishing edge pump is running.
Delay to Turn Function
ON
None
None
20 Sec after Sensor
Light Turns ON
20, 40 or 60 Min
None
20 Sec,
1, 2½ or 5 Min
20 Sec or 2½ Min
5, 10, 15 or 20 Min
25, 30, 35 or 40 Min
Page 13
Delay to Turn Function
OFF
None
None
20 Sec after Sensor Light
Turns OFF
24 Hrs
None
20 Sec or 2½ Min
5, 10, 15 or 20 Min
25, 30, 35 or 40 Min
Not Applicable