Lexmark C792 Family 빠른 참조 - 페이지 7

{카테고리_이름} Lexmark C792 Family에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark C792 Family 11 페이지. Color laser printers
Lexmark C792 Family에 대해서도 마찬가지입니다: 관리자 매뉴얼 (20 페이지), 관리자 매뉴얼 (12 페이지), 연결 매뉴얼 (7 페이지), 릴리스 노트 (4 페이지), 정보 매뉴얼 (1 페이지), 관리자 매뉴얼 (13 페이지), 유지 관리 매뉴얼 (12 페이지), 매뉴얼 (11 페이지), 설정 시트 (4 페이지), 종이 매뉴얼 (3 페이지), 인쇄 매뉴얼 (3 페이지), 보충 설명서 (2 페이지), 인쇄 결함 매뉴얼 (2 페이지), 설정 시트 (2 페이지), 데이터시트 (8 페이지), 데이터시트 (8 페이지)

Lexmark C792 Family 빠른 참조
Paper jam in the fuser
1
Open the side door of the printer.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2
If paper is visible inside the fuser unit, then open the fuser access
door.
2
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Warning—Potential Damage: Do not touch the center of the
fuser unit. Doing so will damage the fuser.
Note: Make sure all paper fragments are removed.
4
Close the side door.
Paper jam under the fuser
1
Open the side door of the printer.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2
If paper is visible under the fuser, then firmly grasp the jammed
paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3
Close the side door of the printer.
4
From the printer control panel, touch Continue, jam cleared.

230 paper jam

1
Open the side door of the printer.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2
Slide the latch to open the duplex cover.
3
Grasp the jammed paper, and then gently pull it out.
1
Note: Make sure all paper fragments are removed.
4
Close the duplex cover.
5
Close the side door of the printer.
1
2
7
6
From the printer control panel, touch Continue, jam cleared.
231–239 paper jams
1
Open the side door of the printer.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2
Slide the latch to open the duplex cover.
2
3
Grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4
Close the duplex cover.
5
Close the side door of the printer.
6
From the printer control panel, touch Continue, jam cleared.

24x paper jam

Paper jam in Tray 1

1
Open the side door.
1