Lexmark C925 관리자 매뉴얼 - 페이지 13

{카테고리_이름} Lexmark C925에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark C925 20 페이지. Setup sheet
Lexmark C925에 대해서도 마찬가지입니다: 관리자 매뉴얼 (12 페이지), 연결 매뉴얼 (7 페이지), 릴리스 노트 (4 페이지), 관리자 매뉴얼 (13 페이지), 유지 관리 매뉴얼 (15 페이지), 매뉴얼 (14 페이지), 관리자 매뉴얼 (12 페이지), 빠른 참조 (10 페이지), 종이 매뉴얼 (3 페이지), 메뉴 맵 (2 페이지), 이동 매뉴얼 (2 페이지), 소모품 매뉴얼 (2 페이지), 정보 매뉴얼 (1 페이지), 인쇄 결함 매뉴얼 (1 페이지), 설치 (2 페이지), 빠른 참조 (12 페이지), 서비스 교육 (18 페이지)

페이지 인쇄
Lexmark C925 관리자 매뉴얼
Activating Eco-Mode
1
Touch Eco-Mode > select a setting.
2
Touch
or Done.
Notes:
•
If your printer model supports duplex printing, then you will be able to print on both sides of the paper. Choose
Paper to set 2-Sided Printing.
•
Choose Energy/Paper to automatically set 2-Sided Printing and Sleep Mode to default values. You will no longer
be able to modify 2-Sided Printing and Sleep Mode after selecting Energy/Paper.
Activating 2-Sided Printing (duplex)
1
Touch 2-Sided Printing, and then select 2-Sided Long Edge, or 2-Sided Short Edge.
2
Touch
or Done.
Activating Quiet Mode
1
Touch Quiet Mode > On.
2
Touch
or Done.
Note: In Quiet Mode, the printer runs at a speed that is slower than the default speed. You should notice an increase
in processing time for your print jobs.
Setting other options
1
Adjust Standby Mode to set the time (1–240 minutes) the printer waits before going into standby mode.
2
Adjust Sleep Mode or Power Saver to set the time (1–240 minutes) the printer waits before going into Sleep Mode
or Power Saver mode.
3
Adjust Screen Brightness to set the screen brightness settings (20–100%).
4
Adjust Darkness or Toner Darkness to set the darkness settings of your printed documents.
Setting advanced options
Note: This option is available only on printers that support the Embedded Solutions Framework (eSF) 3.0.
1
Touch Advanced Options to configure Schedule Power Modes.
Scheduling an energy-saving task
a
Touch the Action left or right arrow to select an energy-saving task.
b
Touch the Time icon to set the time when to perform the energy-saving task.
c
Touch the Day(s) left or right arrow to specify the day.
d
Touch Add to save the configuration.
Configuring the application
13