Lexmark C925 관리자 매뉴얼 - 페이지 8

{카테고리_이름} Lexmark C925에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark C925 12 페이지. Setup sheet
Lexmark C925에 대해서도 마찬가지입니다: 관리자 매뉴얼 (20 페이지), 연결 매뉴얼 (7 페이지), 릴리스 노트 (4 페이지), 관리자 매뉴얼 (13 페이지), 유지 관리 매뉴얼 (15 페이지), 매뉴얼 (14 페이지), 관리자 매뉴얼 (12 페이지), 빠른 참조 (10 페이지), 종이 매뉴얼 (3 페이지), 메뉴 맵 (2 페이지), 이동 매뉴얼 (2 페이지), 소모품 매뉴얼 (2 페이지), 정보 매뉴얼 (1 페이지), 인쇄 결함 매뉴얼 (1 페이지), 설치 (2 페이지), 빠른 참조 (12 페이지), 서비스 교육 (18 페이지)

페이지 인쇄
Lexmark C925 관리자 매뉴얼

Configuring Background and Idle Screen

Adding idle screen and background images
When selecting images to include for the home screen background or idle screen, resize or crop source images to the
desired size before use. The application does not resize or crop images automatically.
Maximum file sizes and supported file types vary by printer model. For more information, see the mouse-over help in
the Embedded Web Server.
1
From the Embedded Web Server, do one of the following:
•
Click Settings > Device Solutions >Embedded Solutions > Background and Idle Screen.
•
Click Settings or Configuration >Embedded Solutions > Background and Idle Screen.
2
Under Idle Screen Images, click Add.
Note: You can also edit and delete existing images.
3
Enter an Image Name, and then upload the file you want to use.
4
Click Apply.
5
Repeat step 2–step 4 to add up to ten idle screen images.
6
Under Idle Screen Settings, make sure Enable is selected, and then adjust the settings as necessary.
7
Under Home Screen Background, make sure Enable is selected.
8
Select one of the default images, or select Custom, and then upload the file you want to use.
9
Click Apply.

Exporting and importing configuration files

After configuring an application, you can export your current settings into a file that can then be imported and used to
configure that application on one or more additional printers.
Exporting and importing application settings using the Embedded Web Server
Note: Not available on all printer models.
Exporting configuration settings
1
From the application configuration settings, click Export.
2
Follow the browser prompts to save the configuration file. You will have the option to enter a unique file name or
use the default name.
Note: If a JVM Out of Memory error occurs, repeat the export until the settings file is saved.
Configuring the application
8