KitchenAid KOMP 6610 매뉴얼 - 페이지 15
{카테고리_이름} KitchenAid KOMP 6610에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KOMP 6610 20 페이지.
KitchenAid KOMP 6610에 대해서도 마찬가지입니다: (프랑스어) 마누엘 (16 페이지)
페이지 인쇄
Professional Functions
By positioning the "Functions Selection" control knob on one of professional functions "PRO", you will be
able to access the preset professional cooking functions. You can select the recipe you want from amoung
the 15 memorised recipes using the "+/-" control knob. Press "OK" to select the function and start
cooking.
Consult the Recipes for information on the use of these functions.
The available functions are shown below. The cooking times and temperatures of each function are shown
in the following tables.
For the recipes found in the Professional Roasting Function, you can use the Heat Probe (see paragraph) or
to cook by setting the required cooking time.
Professional bread making functions
Tradit. bread
Malt bread
Pan pizza
Thin pizza
Focaccia
Bread sticks
Professional cake baking functions
Choux Pastry
Croissant
Sponge cake
Plum cake
Short pastry
Professional roasting functions
N.B. With the roasting functions, you can use the heat probes (see paragraph).
Veal - Pork
Roast beef rare
Roast beef med.
Roast chicken
Roast turkey
Personalising Functions
Use of the functions that can be personalised:
• Select the cooking temperature.
• Wait for the oven to pre-heat.
• Once the required temperature has been reached, the oven will ask if you want to use the heat probe:
1. If you want to use the the probe (refer to page 16 'Using the heat probe'. Put the food in the oven
with the probe piercing the meat and connect the probe to the oven on the right wall of the oven
USING AN OVEN GLOVE TO AVOID GETTING BURNT. At this point the letter "P" appears on
the display as well as the message "probe connected" followed by "+/- to set the probe
temperature": set the temperature required and press "OK" (it is possible to set a temperature of
between 45°C and 90°C). The cooking starts and will end when the probe displays the selected
temperature. When cooking is complete, you will be asked if you wish further cooking time (if so, set
the additional time using the "+/-" control knob).
2. If you do not wish to use the probe, press 'OK' to start the cooking The message 'Probe not
connected' appears and cooking starts manually. It is therefore possible to change the cooking
duration, or cooking end time ( refer to page 13 'Select cooking duration).
15