Gardena 10000 SL Inox 사용 설명서 - 페이지 5

{카테고리_이름} Gardena 10000 SL Inox에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 10000 SL Inox 11 페이지.

페이지 인쇄

For 18000 SP Inox :

Connecting the hose :

4. Operation

Automatic operation :

15 mm (5/ 8 "): GARDENA Tap Connector, Art. No. (2)902,

19 mm (3 /4"): GARDENA Pump Connection Set, Art. No. 1752

Best results in delivery capacity are achieved when using 38 mm

(1 1/ 2 ") hoses.

Best results in delivery capacity are achieved when using 50 mm

(2 ") hoses.

The universal fitting

in the previous table.

1. Cut off nipples of the universal fitting

to match the hose connection.

2. Screw the universal fitting

3. Connect the hose to the universal fitting

We recommend that you secure 50 mm (2 ") and 38 mm (1 1/ 2 ")

hoses additionally with a GARDENA Hose Clip Art. No. 7195

(for 50 mm) and Art. No. 7194 (for 38 mm).

Only for 10000 SL Inox :

For flat suction we recommend using a 13 mm (1/ 2 ") or 15 mm

(5 / 8 ") hose.

Only for 13 mm (1/ 2") hose :

The universal fitting

Regulator Valve Art. No. 977 so that the contents of the out-

let line do not flow back through the pump after pumping. The

Regulator Valve can be ordered from your GARDENA dealer.

The float switch

water level exceeds the cut-in height and the water is pumped out.

The float switch

level falls below the cut-out height.

1. Stand the pump on a firm surface

– or –

use a rope attached through the bore hole in the carrying

handle

During automatic operation, ensure that the float switch

can move freely.

2. Plug the power cable

and GARDENA Standard Hose Connector,

Art. No. (2)916

or GARDENA Tap Connector, Art. No. 2802,

and GARDENA Standard Hose Connector,

Art. No. 2817.

allows you to connect all the hoses listed

onto the pump.

can also be equipped with a GARDENA

turns the pump on automatically when the

turns the pump off again as soon as the water

to immerse the pump in a well or shaft.

into a mains socket.

, which are not needed,