Gardena 10000 SL Inox Manual de Instruções - Página 5
Procurar online ou descarregar pdf Manual de Instruções para Bomba de água Gardena 10000 SL Inox. Gardena 10000 SL Inox 11 páginas.
Imprimir páginaFor 18000 SP Inox :
Connecting the hose :
4. Operation
Automatic operation :
1
3
5
15 mm (5/ 8 "): GARDENA Tap Connector, Art. No. (2)902,
19 mm (3 /4"): GARDENA Pump Connection Set, Art. No. 1752
Best results in delivery capacity are achieved when using 38 mm
(1 1/ 2 ") hoses.
Best results in delivery capacity are achieved when using 50 mm
(2 ") hoses.
The universal fitting
in the previous table.
1. Cut off nipples of the universal fitting
to match the hose connection.
2. Screw the universal fitting
3. Connect the hose to the universal fitting
We recommend that you secure 50 mm (2 ") and 38 mm (1 1/ 2 ")
hoses additionally with a GARDENA Hose Clip Art. No. 7195
(for 50 mm) and Art. No. 7194 (for 38 mm).
Only for 10000 SL Inox :
For flat suction we recommend using a 13 mm (1/ 2 ") or 15 mm
7
(5 / 8 ") hose.
Only for 13 mm (1/ 2") hose :
The universal fitting
Regulator Valve Art. No. 977 so that the contents of the out-
let line do not flow back through the pump after pumping. The
Regulator Valve can be ordered from your GARDENA dealer.
The float switch
water level exceeds the cut-in height and the water is pumped out.
The float switch
2
level falls below the cut-out height.
1. Stand the pump on a firm surface
– or –
use a rope attached through the bore hole in the carrying
2
handle
During automatic operation, ensure that the float switch
can move freely.
2. Plug the power cable
and GARDENA Standard Hose Connector,
Art. No. (2)916
or GARDENA Tap Connector, Art. No. 2802,
and GARDENA Standard Hose Connector,
Art. No. 2817.
7
allows you to connect all the hoses listed
7
onto the pump.
7
can also be equipped with a GARDENA
5
turns the pump on automatically when the
5
turns the pump off again as soon as the water
to immerse the pump in a well or shaft.
1
into a mains socket.
7
, which are not needed,
7
.
5
15