Avaya J129 빠른 참조 - 페이지 4

{카테고리_이름} Avaya J129에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya J129 5 페이지. Ip office telephone
Avaya J129에 대해서도 마찬가지입니다: 빠른 참조 (3 페이지), 빠른 참조 (4 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 참조 (4 페이지)

페이지 인쇄
Avaya J129 빠른 참조
5. Use the Down Arrow key to go to the Call Unpark
screen.
6. Press Select or OK.
7. Enter the extension from which the call was parked.
8. Press OK.
The phone unparks the call.
Toggling between calls
Use this procedure to toggle between active call
appearances.
Ensure that you have more than one active call
appearances.
1. Press Swap.
The current call goes on hold and the other resumes.
2. Press Swap again to go back to the first call.
Setting up automatic call back
When an extension is busy, use this procedure to receive
a call back automatically after the extension is free.
In the IP Office environment, this feature is supported
using short code dialing. Contact your system
administrator for the list of short codes.
Your system administrator must activate the feature for
your extension.
1. During an active call, press Main menu > Features.
2. Use the Down Arrow key to go to the Auto Callback
screen.
3. Press Select or OK to activate Auto Callback.
When you end the callback call, the system
deactivates the feature automatically.
Activating EC500
Use this procedure to answer calls on your cell phone.
This feature is only available in the Avaya Aura
environment.
The system administrator must program the phone so that
you can receive incoming calls on your cell phone.
1. Press Main menu > Features.
2. Use the Down Arrow key to go the EC500 screen.
3. Press OK.
Assigning speed dial entries
Use this procedure to assign speed dial numbers to your
contacts. You can assign up to nine speed dial entries.
This feature is only available in the Avaya Aura
environment.
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone settings, and press Select.
4. Select Speed Dial.
5. Use the Up and Down Arrow keys to select a speed
dial number.
6. Press Contacts to select a contact.
7. Press Select to assign the contact to the selected
speed dial number.
You can assign only one contact.
Setting the display language
1. Press Main menu > Settings > Display Settings.
2. Select Language.
3. Scroll to the language , and press one of the following:
• Select
• OK
The phone prompts for the confirmation.
4. Press one of the following:
• Yes
• OK
The phone returns to the Display Settings screen and
the language changes to the selected language.
Identifying the device type during phone
boot-up
Avaya J100 Series IP Phones screen displays the device
type during the phone boot-up. This feature is supported
only in the phone software version 4.0.3 and later.
1. Set up the phone hardware.
2. Plug the Ethernet cable to the phone.
The phone powers up and starts to initialize.
The phone screen displays one of the following
®
message on Avaya J129 IP Phone:
• Starting... Avaya SIP
• Starting... Open SIP
The phone primary screen displays one of the
following as the backsplash screen:
• A screen with Avaya text for Avaya SIP phones
• A screen with Open SIP text for Open SIP phones
Sending a multicast page
You can send a multicast page to a group of users by
activating the Multicast Paging group on the Phone
screen. If the required group is not added on this screen,
®
you can access all multicast page groups configured for
your phone in the Features menu.
1. Do one of the following:
• Lift the handset.
• Press Speaker.
2. On the Phone screen, scroll to the required multicast
page group, and press Select.
The phone displays the Paging <group name>
box.
3. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.

Troubleshooting

Viewing the Device type
View your device type when your system administrator
asks you to provide your device type information. The
device type can be either Avaya SIP or Open SIP.
1. Press Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to System, and press Select.
4. Scroll to Device type.
Viewing the Server type
View your server type when your system administrator
asks you to provide your server type information. The
server type can be of Avaya Aura
1. Press Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to System, and press Select.
4. Scroll to Server type.
Viewing the Product ID
The product ID information is available on a label on the
back panel of your phone. Alternatively, you can view the
Product ID on the phone screen.
1. Press Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to System, and press Select.
4. Scroll to Product ID.
For more information
Go to
www.avaya.com/support
information, including the user guide, administrator guide,
®
or an open SIP.
for latest support
4