KitchenAid KICU265HSS1 설치 지침 및 사용 및 관리 설명서 - 페이지 9

{카테고리_이름} KitchenAid KICU265HSS1에 대한 설치 지침 및 사용 및 관리 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KICU265HSS1 13 페이지. 36", 48" island canopy range hood
KitchenAid KICU265HSS1에 대해서도 마찬가지입니다: 부품 설명서 (4 페이지)

페이지 인쇄

KitchenAid KICU265HSS1 설치 지침 및 사용 및 관리 설명서

Maintenance

Replacing the light bulb:

This range hood uses fluorescent lamp type F33-15W-T8 and starter type 52.

Remove the retainer clips from both ends of the light cover. Carefully slide the

cover all the way to the right. Then lower the left end of the glass below the

support flange and remove the glass by sliding it back from the left.

Install a new fluorescent light bulb.

Position the right end of the light cover over the flange and slide the cover all the

way to the right. Position the left end of the light cover over the flange and slide

the cover back to left. Reinstall the retainer clips.

retainer

clips

support

flange

BLKI-- _I-- --

LINE

t2@

URC

6@Hz

Note: If a remote blower is used with this range hood,

current draw must not exceed 4 amps.

Note: Instructions are included with

each kit.

Utensil Bar:

Part No. 4378619 - 15" (38 cm)

long (stainless steel only).

Charcoal Filters:

Part No. 4378623 (2 per pkg.)

Non-Vented (Recirculating} Kits*:

Part No. 4378625 (stainless steel)

Part No. 8171292 (biscuit)

Part No. 4378626 (white)

*These instructionsmust be read

before starting the canopy hood

installation.