KitchenAid KICU265HSS1 Installation Instructions And Use And Care Manual - Page 9

Browse online or download pdf Installation Instructions And Use And Care Manual for Ventilation Hood KitchenAid KICU265HSS1. KitchenAid KICU265HSS1 13 pages. 36", 48" island canopy range hood
Also for KitchenAid KICU265HSS1: Parts Manual (4 pages)

Print Page

KitchenAid KICU265HSS1 Installation Instructions And Use And Care Manual

Maintenance

Replacing the light bulb:

This range hood uses fluorescent lamp type F33-15W-T8 and starter type 52.

Remove the retainer clips from both ends of the light cover. Carefully slide the

cover all the way to the right. Then lower the left end of the glass below the

support flange and remove the glass by sliding it back from the left.

Install a new fluorescent light bulb.

Position the right end of the light cover over the flange and slide the cover all the

way to the right. Position the left end of the light cover over the flange and slide

the cover back to left. Reinstall the retainer clips.

retainer

clips

support

flange

BLKI-- _I-- --

LINE

t2@

URC

6@Hz

Note: If a remote blower is used with this range hood,

current draw must not exceed 4 amps.

Note: Instructions are included with

each kit.

Utensil Bar:

Part No. 4378619 - 15" (38 cm)

long (stainless steel only).

Charcoal Filters:

Part No. 4378623 (2 per pkg.)

Non-Vented (Recirculating} Kits*:

Part No. 4378625 (stainless steel)

Part No. 8171292 (biscuit)

Part No. 4378626 (white)

*These instructionsmust be read

before starting the canopy hood

installation.