Gardena ComfortCut Plus 500/27 사용 설명서 - 페이지 4

{카테고리_이름} Gardena ComfortCut Plus 500/27에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena ComfortCut Plus 500/27 15 페이지. Turbotrimmer
Gardena ComfortCut Plus 500/27에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (16 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

Do not use your Trimmer if the power cord is

damaged.

v If the mains cord or extension cable is

damaged while you are working, unplug

the mains plug immediately.

Do not touch the cable until the mains

plug is switched off.

Supply lines must be lighter than:

– common rubber lines (H 05 RNF),

if rubber-insulated;

– common PVC-coated lines (H 05 WF),

if insulated with PVC.

Only connect the device to a mains circuit which

is equipped with a residual current device (RCD)

with a maximum release current of 30 mA.

3. Assembly

Assembling the trimmer:

In Switzerland the use of a residual-current

device is obligatory.

Warning! This unit makes an electromagnetic

field while it operates. This field may under some

conditions interfere with active or passive medi-

cal implants. To decrease the risk of conditions

that can possibly injure or kill, we recommend

persons with medical implants to speak with

their physician and the medical implant manu-

facturer before operating.

Warning! Keep toddlers away when you assem-

ble the unit. Small parts can be easily swal-

lowed. There is also a risk that the polybag can

suffocate toddlers.

CAUTION!

The trimmer may only be operated provided that the

protective cover

1. Pull the lock

belonging to the

additional handle

of the snap-fits

belonging to the

additional handle

grooves

pointing forwards, snap

them into the holder

2. Place both halves of the impeller

around the lower groove

trimmer head

and close until

they audibly engage.

3. From the front, push the plant

guard

into the upper groove

of the trimmer head

so, ensure that the installed bow

can rotate freely (i. e. insert the

bow with the kink pointing

upwards).

4. Place the protective cover

top of the trimmer head

5. Turn the protective cover

can be pushed over the trimmer

head entirely (the two arrows

are directly across from each

other).

6. Rotate the protective cover

clockwise until it audibly engages.

is assembled.

, push in both

and, with the

of the

. In doing

until it

anti-