Gardena ComfortCut Plus 500/27 사용 설명서 - 페이지 5
{카테고리_이름} Gardena ComfortCut Plus 500/27에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena ComfortCut Plus 500/27 15 페이지. Turbotrimmer
Gardena ComfortCut Plus 500/27에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (16 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (16 페이지)
페이지 인쇄
4. Operation
DANGER!
Connecting the trimmer:
w
e
t
r
Setting the working position:
z
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e. g. by tying
the start button to the handle).
Risk of injury!
v Unplug the mains plug of the Turbotrimmer prior to each
adjustment of the working position, to the shaft length,
additional handle or plant guard!
1. Insert the loop of the extension cable
e
relief
from below through the handle
2. Plug the plug
extension cable
3. Plug the extension cable into a 230 V mains power supply.
q
Working position 1:
Standard trimming
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
desired working position.
2. Release the foot pedal
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
r
of the trimmer into the socket
q
.
Working position 2:
Trimming beneath
obstacles
z
and lower the shaft downwards into the
z
and allow the shaft to engage.
q
into the cable strain
w
and pull tight.
t
of the
Working position 3:
Vertical trimming
of overhanging lawn
edges
15