Gardena EasyCut 400/25 사용 설명서 - 페이지 10
{카테고리_이름} Gardena EasyCut 400/25에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena EasyCut 400/25 15 페이지. Turbotrimmer
Gardena EasyCut 400/25에 대해서도 마찬가지입니다: 운영자 매뉴얼 (9 페이지)
페이지 인쇄
8. Technical Data
Turbotrimmer
Motor power consumption
Mains voltage / mains frequency 230 V / 50 – 60 Hz
Filament thickness
Cutting width
Filament supply
Filament feed
Rpm of filament cassette
Weight
Telescopic adjustment
of the turn handle
Workplacerelated
emission values L
1)
pa
Uncertainty k
pa
Noise level L
2)
WA
Uncertainty k
WA
Hand / arm vibration a
Uncertainty k
a
Measuring process complying with
has been measured according to a standardised test procedure and can be used for comparison of one electric power tool with another.
It can also be used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric
power tool.
9. Service / Warranty
Warranty:
20
EasyCut 400/25
(Art. No. 9807)
400 W
1.6 mm
250 mm
6 m
Tip mechanism
approx. 12,000 rpm
approx. 2.9 kg
approx. 24 cm
80 dB (A)
3 dB (A)
measured 92 dB (A) /
guaranteed 95 dB (A)
3 dB (A)
3)
3 m/s
2
vhw
1.5 m/s²
1)
DIN EN 60335-2-91
2)
RL2000/14/EG
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults.
Under warranty we will either replace the unit or repair it free of
charge if the following conditions apply:
• The unit must have been handled properly and in keeping with
the requirements of the operating instructions.
• Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
The filament cassette and cassette cover are consumables and
are not covered by the guarantee.
This manufacturer's guarantee does not affect the user's existing
warranty claims against the dealer / seller.
If you have any problems with this product, please contact
our Service or return the defective unit together with a short
description of the problem – in case of guarantee, with a copy
of the receipt – postage paid to one of the GARDENA Service
Centres listed on the back of this leaflet.
3)
DIN EN 786. The stated vibration emission value