Gardena EasyCut Li-18/23 R 사용 설명서 - 페이지 7

{카테고리_이름} Gardena EasyCut Li-18/23 R에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena EasyCut Li-18/23 R 18 페이지. Accu turbotrimmer
Gardena EasyCut Li-18/23 R에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (17 페이지), 운영자 매뉴얼 (11 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

4. Operation

DANGER!

Setting the working position:

Risk of injury if the Turbotrimmer does not switch off when

you release the start button.

v Never bypass the safety devices or switches (e.g. by tying

the safety lock to the handle).

Risk of injury!

v Remove the battery prior to each adjustment of the

working position, to the shaft length, additional handle

or plant guard!

Working position 1:

Standard trimming

Working position 1:

For standard trimming.

Working position 2:

1. Press the foot pedal

desired working position.

2. Release the foot pedal

CAUTION! Avoid contact between the ground and the trimmer

head in working position 1 + 2.

Working position 3 (only for art. 9825):

The upright must be in the uppermost position in working

position 3.

1. Turn the plant guard

locks into place.

2. Press the foot pedal

uppermost position.

3. Press the button

until it engages.

4. With the impeller, move the trimmer along the lawn edge.

CAUTION! The trimmer may only be used provided that the

trimmer head is engaged at an angle of 0° or 90°.

Working position 2:

Trimming beneath

obstacles

and lower the shaft downwards into the

and allow the shaft to engage.

by 90° to its parking position until it

and move the upright into the

and rotate the trimmer head from 0° to 90°

Working position 3:

Vertical trimming

of overhanging lawn

edges