Gardena EasyCut Li-18/23 R Manual de Instruções - Página 7
Procurar online ou descarregar pdf Manual de Instruções para Aparador Gardena EasyCut Li-18/23 R. Gardena EasyCut Li-18/23 R 18 páginas. Accu turbotrimmer
Também para Gardena EasyCut Li-18/23 R: Manual de Instruções (16 páginas), Manual de Instruções (17 páginas), Manual do operador (11 páginas), Manual de Instruções (17 páginas)
Imprimir página
4. Operation
DANGER!
Setting the working position:
u
z
u
ö
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e.g. by tying
the safety lock to the handle).
Risk of injury!
v Remove the battery prior to each adjustment of the
working position, to the shaft length, additional handle
or plant guard!
Working position 1:
Standard trimming
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
desired working position.
2. Release the foot pedal
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
Working position 3 (only for art. 9825):
The upright must be in the uppermost position in working
position 3.
1. Turn the plant guard
locks into place.
2. Press the foot pedal
uppermost position.
z
3. Press the button
until it engages.
4. With the impeller, move the trimmer along the lawn edge.
CAUTION! The trimmer may only be used provided that the
trimmer head is engaged at an angle of 0° or 90°.
Working position 2:
Trimming beneath
obstacles
u
and lower the shaft downwards into the
u
and allow the shaft to engage.
ö
by 90° to its parking position until it
u
and move the upright into the
and rotate the trimmer head from 0° to 90°
Working position 3:
Vertical trimming
of overhanging lawn
edges
19