Gardena PowerCut Li-40/30 운영자 매뉴얼 - 페이지 4

{카테고리_이름} Gardena PowerCut Li-40/30에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena PowerCut Li-40/30 19 페이지. Battery trimmer
Gardena PowerCut Li-40/30에 대해서도 마찬가지입니다: 운영자 매뉴얼 (12 페이지)

페이지 인쇄

1. Technical Data

Always wear eye protection.

Protective equipment such as gloves, non-skid safety

shoes, or hearing protection used for appropriate condi-

tions will reduce personal injuries.

Be careful during adjustment of the product to prevent

entrapment of the fingers between moving and fixed parts

of the machine, or while assembling both trimmer tubes.

Don't use water, or chemical substances for cleaning the

guard or other parts of the trimmer.

Keep all nuts, bolts and screws tight to be sure the prod-

uct is in a safe working condition.

Do not disassemble the product further than the delivery

status.

2. ASSEMBLY

To assemble the tube:

To assemble the protective

cover:

DANGER! Risk of injury!

Cut injury when the trimmer starts accidentally.

v Wait for the cutting filament to stop and remove the

battery before you assemble the trimmer.

DANGER!

v The trimmer may only be used when the protective cover

is assembled.

1. Slide the tube

Make sure that the tube is firmly located.

2. Close the threaded collar

1. Slide the protective cover

2. Tighten the screw

3. Put the plant guard into the holes

Warning! When wearing hearing protection, and due to

the noise produced by the product, the operator may not

notice persons approaching.

While operation and transport pay special attention to the

hazard for other people.

Stay alert, watch what you are doing and use common

sense when operating a power tool.

Do not use a power tool while you are tired or under the

influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may

result in serious personal injury.

into the threaded collar

to the trimmer head

at the trimmer head

until it engages.