Gardena PowerCut Li-40/30 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Gardena PowerCut Li-40/30에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena PowerCut Li-40/30 19 페이지. Battery trimmer
Gardena PowerCut Li-40/30에 대해서도 마찬가지입니다: 운영자 매뉴얼 (12 페이지)

페이지 인쇄

1. Technical Data

To assemble the additional

handle:

3. OPERATION

To charge the battery:

1. Slide the additional handle

hard against the rivet).

Make sure that the handle is firmly located.

2. Tighten the screw

DANGER! Risk of injury!

Cut injury when the trimmer starts accidentally.

v Wait for the cutting filament to stop and remove the

battery before you adjust or transport the trimmer.

CAUTION!

Overvoltage damages the battery and the battery

charger.

v Make sure that you use the correct mains voltage.

For the GARDENA Battery Trimmer Art. 9827-55 there is

no battery in the scope of delivery.

Before you use the battery the first time, the battery must be com-

pletely charged.

The lithium-ion battery can be charged in any state of charge and

the charging process can be disconnected at any time without to

damage the battery (no memory effect).

1. Push both locking buttons

battery holder

2. Connect the mains cable

3. Connect the mains cable

4. Connect the battery charger cable

When the charging control lamp

green once per second the battery is being charged.

When the charging control lamp

green the battery is completely charged

(Charging time, see 7. TECHNICAL DATA).

5. Examine the charge status regularly while you charge.

6. When the battery

battery

7. Disconnect the charger

into the rivet

and remove the battery

to the charger

to a 230 V mains socket.

is completely charged, disconnect the

from the charger

from the mains.

(Do not push very

from the

to the battery

at the charger flashes

at the charger illuminates