Gardena PowerCut Li-40/30 운영자 매뉴얼 - 페이지 7
{카테고리_이름} Gardena PowerCut Li-40/30에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena PowerCut Li-40/30 19 페이지. Battery trimmer
Gardena PowerCut Li-40/30에 대해서도 마찬가지입니다: 운영자 매뉴얼 (12 페이지)
페이지 인쇄
ß
B
ß
D
ß
P
q
ß
e
ß
Le
ß
Ls
ß
s
To adjust the position of the
additional handle:
q
f
To adjust the plant guard:
20
To start:
ß
A
1. Put the battery
engages.
2. Push the On/Off button
On-LED
3. Hold the additional handle
e
4. Hold the main handle
e
lever
.
The trimmer starts.
To stop:
1. Release the start lever
The trimmer stops.
2. Push the On / Off button
On-LED
ß
P
3. Push both locking buttons
the battery holder
The position of the additional handle can be adjusted to your body
height.
1. Open the clamp lever
2. Slide the additional handle
3. Close the clamp lever
6
Park position
v Tilt the plant guard
locks into place.
ß
into the battery holder
B
m
on the control panel
∂
illuminates green.
q
with one hand.
w
with the other hand and pull the start
e
.
m
on the control panel
∂
is off.
ß
and remove the battery
A
ß
.
D
f
.
q
to the required position.
f
.
6
through 90° into the required position until it
ß
until it audibly
D
N
until the
N
until the
ß
from
B
6
Work position