Gardena smallCut 사용 설명서 - 페이지 5

{카테고리_이름} Gardena smallCut에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena smallCut 13 페이지. Turbotrimmer
Gardena smallCut에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄
Gardena smallCut 사용 설명서
Starting your Turbotrimmer :
8
D
Trimming along lawn edges
and in awkward places :
A
B

5. Maintenance

Risk of injury !
Risk of injury !
Cleaning the cover
and ventilation slots :
E
1
Replacing the filament
cassette :
1. Press the start button
the handle
The Turbotrimmer starts.
2. Release the start button
The Turbotrimmer switches off.
1. For vertical cutting, loosen the tightening
B
nut
, turn the additional handle
and then tighten the nut
2. Swivel the plant guard
the park position until it clicks into place.
3. Lift the Turbotrimmer by the handle
and additional handle
cutting position.
8
4. When trimming between paving stones,
hold the Turbotrimmer so that the cutting
filament moves slightly above the paved
ground.
There is a risk of injury from the cutting filament !
V Always unplug the mains plug of the Turbotrimmer be-
fore carrying out maintenance work !
Risk of injury and risk of damage to property !
V Never clean the Turbotrimmer under running water or
with a water jet (in particular a high pressure water jet).
The ventilation slots must always be free of dirt.
v Remove any grass and dirt from the cover
E
slots
after each use.
Risk of injury !
A
V Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use the original GARDENA Filament Cassette. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
• Filament Cassette for Turbotrimmer classicCut special :
Art. No. 5364 -20
D
on
8
.
D
on the handle
A
B
again by hand.
5
backwards to
A
and turn to the
8
.
Cutting position
180 °
5
8
Park position
1
and ventilation
5
13