Lexmark J 110 Appletalk 매뉴얼 - 페이지 11

{카테고리_이름} Lexmark J 110에 대한 Appletalk 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark J 110 14 페이지. Appletalk and marknet print servers
Lexmark J 110에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지), 개요 (1 페이지)

페이지 인쇄
Lexmark J 110 Appletalk 매뉴얼
Printing
Print materials
Supplies
Troubleshooting
Administration
What shows on the
Description
four indicator lights
binary 9 (for 0.75 sec),
Serial error
binary 1 (for 0.75 sec),
repeat continuously.
Type = Parity
www.lexmark.com
Lexmark J110
AppleTalk and MarkNet print servers
Cause and solution
Parity error occurred during serial print job.
1 Reset the print server. (The 9,1 error code
does not go away until you reset the print
server. This is to make sure you see that a
parity error occurred. To turn parity
checking off, use a utility or telnet to port
9000.)
2 Send the job again.
11