Lexmark J 110 Appletalk 매뉴얼

{카테고리_이름} Lexmark J 110에 대한 Appletalk 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark J 110 14 페이지. Appletalk and marknet print servers
Lexmark J 110에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지), 개요 (1 페이지)

페이지 인쇄
Lexmark J 110 Appletalk 매뉴얼
Printing
Print materials
Supplies
Troubleshooting
Administration

Why you need to change the AppleTalk type

The J110 printer requires that you change the AppleTalk type in order for you to print
AppleTalk network print jobs.

Before you change the setting

Verify your printer hardware setup is complete. Refer to the printer setup guide for detailed
instructions.
Change the AppleTalk type
If you have TCP/IP available on your network, we recommend you assign an IP address to
the MarkNet print server. Running TCP/IP with your print server lets you use the full range of
print management tools and perform the easiest configuration.
Method 1 is an easy way to change the AppleTalk type for IP configured print servers. You
can use Method 2 as well.
If you are not running TCP/IP, you must use Method 2.
www.lexmark.com
AppleTalk and MarkNet print servers
Lexmark J110
1