Lexmark J 110 Appletalk 매뉴얼 - 페이지 5

{카테고리_이름} Lexmark J 110에 대한 Appletalk 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark J 110 14 페이지. Appletalk and marknet print servers
Lexmark J 110에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지), 개요 (1 페이지)

페이지 인쇄
Lexmark J 110 Appletalk 매뉴얼
Printing
Print materials
Supplies
Troubleshooting
Administration

Create a Desktop printer

Each Macintosh user on the AppleTalk network who wants to use the network printer should
do the following steps.
1
In the Chooser, select the J110 printer.
2
If you have a routed network, there is a list of zones you can select from. The new
printer is in the default zone for the network. Select this zone. If you don't know which
zone to select, look on the network setup page under AppleTalk for Zone.
3
Select the new printer. If you don't know which printer to select, look on the network
setup page under AppleTalk. Find the MarkNet port for your printer. The default name
of the printer is listed beside Name.
4
Click Create.
5
Look for an icon to appear in the Chooser next to the printer name. This means you
have successfully set up the new printer. A new desktop printer icon is placed on your
desktop, too.

Change the zone and printer name

The MarkNet print server works automatically with AppleTalk networks. However, if you would
like to use a zone and printer name different from the defaults, you can use MarkVision to
change these settings.
www.lexmark.com
AppleTalk and MarkNet print servers
Lexmark J110
5