Gardena 1242 사용 설명서 - 페이지 6

{카테고리_이름} Gardena 1242에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1242 15 페이지. Programming unit
Gardena 1242에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (15 페이지)

페이지 인쇄

Creating watering

programmes :

Watering Programmes ( Level 2)

Prerequisite :

you must have entered the current time and current day.

For reasons of clarity, we recommend that you record the data

for your Irrigation Valves in the watering plan in the appendix of

the Operating Instructions before you begin entering watering data

in the Programming Unit.

Select the watering programme :

You can save up to 6 watering programmes.

1. If you have not reset the time and day and the display shows

the main level, press the Menu key twice.

Programme 1 flashes.

2. Select the programme using the

programme 1) and then confirm by pressing the Ok key.

START TIME

and the hours flash.

Set the Watering Start Time :

3. Set the hours for the watering start time using the

(for example

hours) and confirm by pressing the Ok key.

START TIME

and the minutes flash.

4. Set the minutes for the watering start time using the

(for example

minutes) and confirm by pressing the Ok key.

RUN TIME

and the hours flash.

Set the Watering Time :

5. Set the hours for the watering time using the

(for example

hour) and confirm by pressing the Ok key.

RUN TIME

and the minutes flash.

6. Set the minutes for the watering time using the

(for example

minutes) and confirm by pressing the Ok key.

The arrow ê above the watering cycle flashes.

Set the Watering Cycle :

(a) Every 2nd or 3rd day (from the current day)

(b) Select any day (allows daily watering)

keys (for example,

keys