Gardena 1242 Kullanım Talimatları Kılavuzu - Sayfa 6
Çim ve Bahçe Ekipmanları Gardena 1242 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena 1242 15 sayfaları. Programming unit
Ayrıca Gardena 1242 için: Kullanım Talimatları Kılavuzu (15 sayfalar), Kullanım Talimatları Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Creating watering
programmes :
1.
2.
3.
4.
5.
6.
Watering Programmes ( Level 2)
Prerequisite :
you must have entered the current time and current day.
For reasons of clarity, we recommend that you record the data
for your Irrigation Valves in the watering plan in the appendix of
the Operating Instructions before you begin entering watering data
in the Programming Unit.
Select the watering programme :
You can save up to 6 watering programmes.
1. If you have not reset the time and day and the display shows
the main level, press the Menu key twice.
Programme 1 flashes.
2. Select the programme using the
programme 1) and then confirm by pressing the Ok key.
START TIME
and the hours flash.
Set the Watering Start Time :
3. Set the hours for the watering start time using the
16
(for example
hours) and confirm by pressing the Ok key.
START TIME
and the minutes flash.
4. Set the minutes for the watering start time using the
30
(for example
minutes) and confirm by pressing the Ok key.
RUN TIME
and the hours flash.
Set the Watering Time :
5. Set the hours for the watering time using the
1
(for example
hour) and confirm by pressing the Ok key.
RUN TIME
and the minutes flash.
6. Set the minutes for the watering time using the
30
(for example
minutes) and confirm by pressing the Ok key.
The arrow ê above the watering cycle flashes.
Set the Watering Cycle :
(a) Every 2nd or 3rd day (from the current day)
(b) Select any day (allows daily watering)
-
keys (for example,
-
keys
-
-
keys
-
keys
keys
17